Crestron DIN-PWS50 Guide d'installation télécharger pdf (Page 25)

Crestron DIN-AP3 DIN Rail 3-Series Automation Processor

Operations & Installation Guide – DOC. 7491A Automation Processor: DIN-AP3 • 21

Configure for Operations

Before setting up the DIN-AP3 the time and time zone need to be set.

The DIN-AP3 can also be further configured using a Web browser.

Set Date and Time

1. Establish communication with the DIN-AP3 as described in

“Establishing Communication” on page 18.

2. In Crestron Toolbox, select Functions | System Clock….

3. Set the date and time.

Online Configuration

The DIN-AP3 can be configured using the built-in Web-based setup tool.

1. Using Internet Explorer, navigate to http://xxx.xx.xx.xxx/setup

where xxx.xx.xx.xxx is the IP address of the control system.

NOTE: The Web-based setup tool is only accessible from Internet

Explorer.

NOTE: If a security warning is displayed, click Install to

continue.

The control system’s splash screen is displayed.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Pas de commentaire

Crestron DIN-PWS50 Guide d'installation Page 25