Crestron DIN-PWS50 Guide d'installation télécharger pdf (Page 22)

DIN Rail 3-Series Automation Processor Crestron DIN-AP3

18 • Automation Processor: DIN-AP3 Operations & Installation Guide – DOC. 7491A

Uploading and Upgrading

Crestron recommends using the latest programming software and that

each device contains the latest firmware to take advantage of the most

recently released features. However, before attempting to upload or

upgrade it is necessary to establish communication. Once communication

has been established, files (for example, programs or firmware) can be

transferred to the control system (or device). Finally, program checks can

be performed (such as changing the device ID or creating an IP table) to

ensure proper functioning.

NOTE: Crestron software and any files on the Web site are for

authorized Crestron dealers and Crestron Service Providers (CSPs) only.

New users must register to obtain access to certain areas of the site

(including the FTP site).

Establishing Communication

Use Crestron Toolbox for communicating with the DIN-AP3; refer to the

Crestron Toolbox help file for details. There are two methods of

communication: USB and TCP/IP.

USB

NOTE: Required for initial setup of Ethernet parameters.

NOTE: Required for loading projects and firmware.

USB Communication

DIN-AP3

PC Running

Crestron Toolbox

USB

The COMPUTER port on the DIN-AP3 connects to the USB port on the

PC via the included Type A to Type B USB cable:

1. Click Tools | System Info.

2. Click the

icon.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Pas de commentaire

Crestron DIN-PWS50 Guide d'installation Page 22