Crestron CNX-PVID8x4 Spécifications télécharger pdf (Page 20)

Professional Video Distribution Switch Crestron CNX-PVID8x4

16 • Professional Video Distribution Switch: CNX-PVID8x4 Operations Guide - DOC. 8166A

Illustration of Out-of-the-Box Configuration

Cabling and Jumpering Internal

Boards:

Cable between level 1 and level 3

is not attached.

Nine jumpers remain in their

original location (no jumpers

on the jumper holder).

COMPONENT - CONNECTS TO LEVELS 1, 2, & 3*.

S-VIDEO - CONNECTS TO LEVELS 1 & 2 ONLY*.

COMPOSITE - CONNECTS TO LEVEL 1 ONLY*.

* DIGITAL AUDIO (IF AVAILABLE) CONNECTS

TO LEVEL 4 ONLY ON THE SAME INPUT

FOR ANY OF THE VIDEO FORMATS. FOR

EXAMPLE, REFER TO INPUTS 9, 10, & 11.

NOTES:

LEVELS 1 THROUGH 4 ARE ALWAYS

SWITCHED TOGETHER.

EACH SOURCE CONNECTS TO A SINGLE

INPUT (LABELED 1 THROUGH 16).

THE SEQUENCE OF SOURCES IS

INDEPENDENT OF VIDEO FORMAT.

MAXIMUM NUMBER OF SOURCES ALLOWED

WITH THIS CONFIGURATION IS 16.

STRONCRE

7HIGKLERO CINC .CTRONICSLE 607 4J.N.,SAU

1 2345 106 789

INPUT

11 12 13

567 8

1234

5678

1234

5678

1234

5678

65 87

OUTPUT

15 16 1234

OUTPUT

SETUP

NET

Y ZG

Composite/S-Video Only Configuration

AKA: 16 Video & Up to 16 S-Video or Video Sources

NOTE: Dealing with a system that contains more than 16 sources? This

configuration may be preferred as long as the system does not contain component

video.

To achieve this configuration, the unit must be opened and the cable assembly

attached. Refer to "Cabling and Jumpers" on page 8 for details. The internal jumpers

remain intact.

Conditions of this configuration;

lease read care

ull

This configuration allows for the greatest number of sources, 32. However, those

sources can only be composite (up to 32, when there is no S-video) and S-video (up

to 16, maximum). The illustration after this paragraph provides a visual depiction of

a system that utilizes the CNX-PVID8x4 in the composite/S-video only

configuration. Some of the sources also include digital audio. Notice that S-video

sources can only be connected to input 1 through 16 (connect Y to level 1 and C to

level 2). Installation of the cable assembly conceptually eliminates level 3 (thus

component sources are not allowed with this configuration) and extends level 1 with

16 composite-only connections. Of course, if there are fewer than 16 S-video sources

in the system, the number of composite sources can increase as long as the total

number of composite and S-video sources does not exceed 32.

NOTE: The composite sources connected to level 3 are switchable to the output on

level 1.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Crestron CNX-PVID8x4 Spécifications Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau Crestron CNX-PVID8x4