Crestron CNX-PVID8x4 Spécifications télécharger pdf (Page 37)

Crestron CNX-PVID8x4 Professional Video Distribution Switch

Operations Guide - DOC. 8166A Professional Video Distribution Switch: CNX-PVID8x4 • 33

“Port Settings” Window

NOTE: The parameters shown in the illustration above are the port settings for a

2-Series control system. Consult the Operations Guide for the control system being

used for exact parameter selection.

4. To verify communication, select Diagnostics | Establish

Communications (Find Rack). This should display a window that

gives the COM port and baud rate. If communication cannot be

established, refer to the “Troubleshooting Communications” section in

the respective Operations Guide for the control system.

Uploading a SIMPL Windows Program

A control system source file has

the extension .smw. A compiled

SIMPL Windows file has the

extension .spz for a 2-Series

control system, .bin for CNX

generation, and .csz for CNX

generation with SIMPL+.

The SIMPL Windows file can be uploaded to the control system using SIMPL

Windows or via the Crestron Viewport.

Upload via SIMPL Windows

1. Start SIMPL Windows.

2. Select File | Open to view the “Open” window, navigate to the SIMPL

Window file (.smw), and click Open.

3. Select Project | Transfer Program.

Upload via Crestron Viewport

1. Verify that the procedure for “Communication Settings” that begins on

page 31 has been performed.

2. As shown after this step, select File Transfer | Send Program

(alternatively, press Alt+P) from the Viewport menu.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Crestron CNX-PVID8x4 Spécifications Page 37