Crestron C2N-FT-TPS4-U Guide d'installation Page 27

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 26
Crestron C2N-FT-TPS4/TPS4-U FlipTop Touchpanel Control Center
Typical Connection Diagram when Uploading
NOTE: Use a straight-through serial cable for connection to a 2-Series processor.
1. Open Crestron Toolbox and click Tools | Manage Address Book to display
the communications settings. The DefaultAddressBook.adr file contains
several default address settings. Select Serial on COM 1 for serial
communication.
Crestron Toolbox – “Address Book” Window
The PC communication settings specified in the address book should match
the protocol that the control processor expects. The settings are as follows:
Port = COM 1 through COM 8. Select the correct COM port on the
PC.
Baud rate = Auto Detect.
Parity = None.
Number of data bits = 8.
Number of stop bits = 1.
Hardware handshaking (RTS/CTS) enabled.
Software handshaking (XON/XOFF) not enabled.
Operations & Installation Guide – DOC. 6398 FlipTop Touchpanel Control center: C2N-FT-TPS4/TPS4-U 23
Vue de la page 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Commentaires sur ces manuels

Pas de commentaire