Crestron C2N-SDC Guide d'installation télécharger pdf (Page 30)

Shade & Drape DC Motor Controller Crestron C2N-SDC-DC

Locate Firmware in the “Open” Window

7. Click Open and the file transfers to the unit.

8. The “Firmware” window indicates the new firmware version.

Click Close. The device reboots with the new firmware.

Problem Solving

Troubleshooting

The following table provides corrective action for possible trouble

situations. If further assistance is required, please contact a Crestron

customer service representative.

C2N-SDC-DC Troubleshooting

TROUBLE

PROBABLE

CAUSE(S)

CORRECTIVE

ACTION

Wrong power

supply

Use a Crestron power

supply

Green PWR LED

does not

illuminate

C2N-SDC-DC is

not receiving

power

Verify that cable plugged

into NET port is secure

Continued on the following page

y Shade & Drape DC Motor Controller: C2N-SDC-DC Operations & Installation Guide - DOC. 6373

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Crestron C2N-SDC Guide d'installation Page 30