Crestron C2N-HBLOCK Guide d'installation télécharger pdf (Page 5)

Crestron C2N-HBLOCK Multi-Type Network Distribution Block

Multi-Type Network Distribution

Block: C2N-HBLOCK

Introduction

The C2N-HBLOCK is a Crestron



control network (Cresnet



) multiple

connector type, network distribution block that provides wiring for up to

15 devices and/or peripherals. The C2N-HBLOCK provides 24 volts

direct current (VDC), Cresnet Y and Z data signals, and ground through

three different types of Cresnet connectors. Using any one of the

connectors as an input source, the remaining connectors may be used as

outputs to other equipment. The C2N-HBLOCK contains light-emitting

diode (LED) indicators that monitor the input power and input data

signals.

Functional Summary

• Provides wiring for up to 15 devices and/or peripherals

• Three different types of Cresnet connectors, all of which are in

parallel

- Eight 3.5mm 4-pin screw terminal connectors (mini Cresnet)

- Five 5mm 4-pin screw terminal connectors (standard Cresnet)

- Three 6-pin RJ11 modular connectors

• Two LEDs enable user to diagnose wiring problems

Operations & Installation Guide – DOC. 8157A Multi-Type Network Distribution Block • 1

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Crestron C2N-HBLOCK Guide d'installation Page 5