Crestron C2N-HBLOCK Guide d'installation télécharger pdf (Page 10)

Multi-Type Network Distribution Block Crestron C2N-HBLOCK

Detach Mounting Plate

2. For further instructions, refer to the latest revision of the

CNXRMAK Installation Guide (Doc. 8156). This document

can be obtained from the Downloads | Product Manuals section

of the Crestron website (www.crestron.com)

Network Wiring

CAUTION: Use only Crestron power supplies for Crestron equipment.

Failure to do so could cause equipment damage or void the Crestron

warranty.

NOTE: For larger networks (i.e., greater than 28 network devices), it

may be necessary to add a Cresnet Hub/Repeater (CNXHUB) to maintain

signal quality throughout the network. Also, for networks with lengthy

cable runs or varying types of network devices, it may be desirable to add

a hub/repeater after only 20 network devices.

NOTE: When installing network wiring, refer to the latest revision of

the wiring diagram(s) appropriate to your specific system configuration,

available from the Downloads | Product Manuals | Wiring Diagrams

section of the Crestron website (www.crestron.com).

6 • Multi-Type Network Distribution Block Operations & Installation Guide – DOC. 8157A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Crestron C2N-HBLOCK Guide d'installation Page 10