Crestron CNWM-LU12 Guide d'installation télécharger pdf (Page 8)

CDI-S100 Installation Guide v1.08

GENERAL FORMAT

FUNCTION COMMAND (ASCII)

Select Line Input x as music source <MU,SAx/>

Select next higher-numbered Line Input <MU,SU/>

Select next lower-numbered Line Input <MU,SD/>

Set music level to –(m/2) dB relative to max volume <MU,LAm/>

Reduce music level by (p/2) dB <MU,LDp/>

Increase music level by (q/2) dB <MU,LUq/>

Mute music <MU,M/>

Unmute music <MU,O/>

Mute microphone y <MI.y,M/>

Unmute microphone y <MI.y,O/>

Set master mic level to –(m/2) dB relative to max volume <MI,LAm/>

Reduce master mic level by (p/2) dB <MI,LDp/>

Increase master mic level by (q/2) dB <MI,LUq/>

Mute all microphones <MI,M/>

Unmute all microphones <MI,O/>

Examples:

1. Input selection

To directly select a specic music source, the value of x in the general format is the number of the

Line Input (1 to 6) selected as the music source. Note that x can also be set to zero to positively

de-select all music sources.

Alternatively, the music sources may be “stepped through” one at a time (in either direction),

using the increment or decrement commands. If an increment command is received when Line In

6 is already set, the command is ignored. If a decrement command is received when Line 1 is set,

no music source is selected (equivalent to the “Line 0” command mentioned above). Any further

decrement commands are ignored

EXAMPLE

COMMAND

(ASCII)

COMMAND (HEX)

Select Line Input 3 <MU,SA3/> 3C 4D 55 2C 53 41 33 2F 3E

Select Line Input one above current <MU,SU/> 3C 4D 55 2C 53 55 2F 3E

Select Line Input one below current <MU,SD/> 3C 4D 55 2C 53 44 2F 3E

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Crestron CNWM-LU12 Guide d'installation Page 8