Crestron CHV-TSTATEX Guide d'installation télécharger pdf (Page 15)

Crestron CHV-TSTAT and CHV-THSTAT Thermostats

Operations and Installation Guide – DOC. 8163E Thermostats: CHV-TSTAT and CHV-THSTAT

•

Setup

Network Wiring

When wiring the Cresnet network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results or damage to the

equipment. Use the Crestron Power Calculator to help calculate how much power is

needed for the system (

www.crestron.com/calculators).

For networks with 20 or more devices, use a Cresnet Hub/Repeater (CNXHUB) to

maintain signal quality.

For more details, refer to “Check Network Wiring” on page 76.

Identity Code

NOTE: The latest software can be downloaded from the Crestron Web site

(www.crestron.com/software).

The Net ID of the CHV-TSTAT/CHV-THSTAT has been factory set to 2A. The Net

IDs of multiple CHV-TSTAT/CHV-THSTAT devices in the same system must be

unique. Net IDs are changed from a personal computer (PC) via Crestron Toolbox™

(refer to “Establishing Communication” on page 72).

When setting the Net ID, consider the following:

• The Net ID of each unit must match an ID code specified in the Crestron

Studio™ or SIMPL Windows program.

• Each network device must have a unique Net ID.

For more details, refer to the Crestron Toolbox help file.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 91 92

Pas de commentaire

Crestron CHV-TSTATEX Guide d'installation Page 15