Crestron ST-1700C Spécifications télécharger pdf (Page 17)

Crestron ST-1700C 1-Way Wireless RF Touchpanel

7. Refer to the figure below. From the Viewport menu, select Setup |

Communications settings (alternatively, depress Alt+D) to open the “Port

Settings” window.

Accessing the “Port Settings” Window

8. Select the RS-232 connection type. Verify the available COM is selected.

Verify that the baud rate is set to 115200 (2-series default), the parity is None,

the data bits is Eight, and the stop bits is One. Click the OK button to save

the settings and close the window.

NOTE: You may need to select a lower baud rate for larger files (38,400 is

recommended). Make sure Xmodem is selected from Mode for Network Transfers.

“Port Settings” Window

9. Proceed to “Uploading a VT Pro-e Project” on the next page or “Firmware

Upgrade” that begins on page 15 as appropriate.

Operations Guide – DOC. 6050 1-Way Wireless RF Touchpanel: ST-1700C • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Pas de commentaire

Crestron ST-1700C Spécifications Page 17