Crestron DM-RMC-200-C Guide d'installation télécharger pdf (Page 33)

Crestron DM-RMC-200-C DigitalMedia 8G+™ Receiver 200

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device

contains the latest firmware to take advantage of the most recently released features.

However, before attempting to upload or upgrade it is necessary to establish

communication. Once communication has been established, files (for example,

firmware) can be transferred to the device. In addition, the IP table of the device can

be configured.

Establishing Communication

Use Crestron Toolbox for communicating with the DM-RMC-200-C; refer to the

Crestron Toolbox help file for details.

A PC running Crestron Toolbox communicates with the DM-RMC-200-C in the

following ways:

• Via a DM switcher using TCP/IP or USB communication. TCP/IP provides

a faster method of communication than USB.

• Via the LAN port of the DM-RMC-200-C using TCP/IP communication.

In this scenario, the DM-RMC-200-C is used in a standalone configuration

(i.e., a DM switcher is not used).

Via DM Switcher

TCP/IP Communication via DM Switcher

DM 8G+

DM Switcher

PC Running

Crestron Toolbox

LAN

DM-RMC-200-C

To establish TCP/IP communication between the PC and the DM-RMC-200-C via

the DM switcher:

1. Establish communication between the PC and the DM switcher as described

in the latest version of the DigitalMedia Switchers Operations Guide

(Doc. 6755).

2. Use the Device Discovery Tool in Crestron Toolbox to find the IP address

of the DM-RMC-200-C. The tool is available in Toolbox version 1.15.143

or later.

3. Use the Address Book in Crestron Toolbox to create an entry for the

DM-RMC-200-C using the TCP connection type, and enter the IP address

of the DM-RMC-200-C.

4. Display the “System Info” window of the DM-RMC-200-C (click the

icon); communications are confirmed when the device information

is displayed.

Operations & Installation Guide – DOC. 7126B DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C • 27

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Pas de commentaire

Crestron DM-RMC-200-C Guide d'installation Page 33