Crestron PSPHD Spécifications télécharger pdf (Page 57)

Crestron PSPHD PROCISE 7.3 Surround Sound Processor

Operations Guide – DOC. 6837C PROCISE 7.3 Surround Sound Processor: PSPHD • 51

Operation

Turn on the PSPHD

To turn on the PSPHD, press STANDBY, SOURCE, MODE, SETUP, INFO,

HOME, METER, SPECTRUM, or LEVEL.

NOTE: Until Audyssey calibration has been performed, the PSPHD front panel

shows a message every few seconds indicating that the system should be calibrated.

Standby

To place the PSPHD in the Standby mode, press STANDBY. The display and

outputs are turned off and the STANDBY LED lights.

Home

Press HOME to return to the Home screen. The selected source (with the selected

decoding mode) and volume level are displayed.

Display Brightness

The display has four levels of brightness. Press DISPLAY to cycle through the

brightness settings.

Volume Control

Use the volume knob to adjust the volume level. To raise the volume, turn the knob

clockwise. To lower the volume, turn the knob counterclockwise. The volume level

is displayed in the right-hand display.

Mute

To mute the PSPHD’s audio outputs, press the MUTE button. The associated LED

lights. To unmute, press the MUTE button. The associated LED extinguishes.

Select a Source

The PSPHD can select one of 27 sources for listening.

NOTE: If a source’s name has been deleted with the PROCISE Tools, it does not

display.

To select a source:

1. Press SOURCE.

2. Turn the selection knob until the desired source is displayed.

3. Press the selection knob to select the displayed source.

4. Press HOME to return to the Home screen.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 69 70

Pas de commentaire

Crestron PSPHD Spécifications Page 57