Crestron TPS-5000L Guide d'installation télécharger pdf (Page 12)

Video Card for TPS/Lectern Panel Crestron TPS-VIDL-1/TPS-VIDL-2

Remove Touchpanel Rear Cover

5. Refer to the following diagram. Using a #1 Phillips

screwdriver, loosen and remove the two screws that secure the

PCB blank plate and remove the plate.

Remove PCB Blank Plate

6. As shown in the diagram after this step, align the pins on the

touchpanel interface connector of the TPS-VIDL-1/VIDL-2

with the touchpanel motherboard connector.

8 • Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2 Operations & Installation Guide - DOC. 6070

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Crestron TPS-5000L Guide d'installation Page 12