Crestron FTI-PWR-D Guide d'installation télécharger pdf (Page 13)

Crestron FTI-PWR-D FlipTop Power Center - International Version

Mounting Parts Supplied

DESCRIPTION PART

NUMBER

QUANTITY

Screws, #06-32 x 3/16” (~5 mm),

Pan Head, Phillips

2007204 8

Screws, #10-32 x 2” (~51 mm),

Pan Head, Phillips

2007293 4

Mounting Bracket 2013224 2

1. Install the eight supplied #06-32 x 3/16” (~5 mm) screws (2007204) on the

front and back of the unit. Do not fully tighten the screws. These will be

used to secure the front and back mounting brackets. Refer to the

illustration below.

2. Position the FTI-PWR-D in the mounting hole.

Mounting Bracket Screw Locations

3. Thread a small portion of the #10-32 x 2” (~51 mm) screws (2007293) into

the mounting brackets (two screws per bracket). Refer to the illustration on

the following page.

4. Slide the mounting brackets over the #06-32 screws and tighten the

#06-32 screws.

Operations & Installation Guide – DOC. 6797B FlipTop Power Center – International Version: FTI-PWR-D • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Crestron FTI-PWR-D Guide d'installation Page 13