Crestron TPMC-8L Guide d'installation télécharger pdf (Page 17)

Crestron TPMC-8L Isys i/O™ 8.4” Touchpanel Media Center

NOTE: Select Exit Setup Mode to exit the setup menu.

TPMC-8L Setup Menu

NOTE: Another way to enter the setup menu (after a project has been loaded) is to

touch the screen during boot up when you see the “Preparing to Load Project”

message. Maintain touch until after the countdown, when the message will change to

“Loading Setup Screen”.

The setup menu provides access to all basic functions and parameters. It is divided

into Setup, Ethernet, Screen Brightness, Light Sensor, Hardkey Backlight, Standby

and Ethernet Status sections. There are also buttons for Install, Save & Reboot and

Exit.

NOTE: To allow the touchpanel to upload projects, standby is disabled until

approximately five minutes after the project is loaded.

NOTE: The Install button is reserved for future applications.

To exit the setup menu and return to the program, touch Exit, located at the bottom

of the setup menu. To save any changes and reboot the touchpanel, touch Save &

Reboot, located at the bottom of the setup menu.

Setup Menu Details

The setup menu allows configuration of the touchpanel’s settings for security, touch

screen calibration, runtime project, audio, embedded applications, biometrics, hard

button programming and diagnostics. The setup menu also has a button that will

toggle the on-screen keyboard on and off.

Operations & Installation Guide – DOC. 6594B Isys i/O™ 8.4” Touchpanel Media Center: TPMC-8L • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Pas de commentaire

Crestron TPMC-8L Guide d'installation Page 17