Crestron DigitalMedia Room Controller DM-RMC-100 Guide d'installation télécharger pdf (Page 8)

DigitalMedia 8G™ Fiber Receiver 100 Crestron DM-RMC-100-S

DigitalMedia 8G

DigitalMedia 8G provides a one-wire digital AV distribution and control network.

Engineered for ultra high bandwidth and ultimate scalability, DM 8G handles

uncompressed video beyond high definition with support for HDCP, Deep Color,

and 3D, plus high bitrate 7.1 audio formats including Dolby

TrueHD and DTS-HD

Master Audio ™, uncompressed multichannel PCM audio, and high-speed Ethernet,

all over one simplex multimode fiber. DM 8G enables wire distances up to 1000 feet

(~300 meters) using CresFiber

8G fiber optic cable.

DigitalMedia manages all of the various AV signals and devices in your system,

matching each source’s output to the capabilities of the selected display(s) without

relying on scaling or compression. Every signal is preserved in its native video

resolution and audio format, ensuring a pure, lossless signal path throughout.

Multimedia Display Interface

A single HDMI digital AV output port is provided on the DM-RMC-100-S,

supporting 1080p60 HDTV and WUXGA computer signals with HDCP, Deep

Color, 3D, and multi-channel HD lossless audio—all through a single connection.

The HDMI output can also handle DVI signals using an appropriate adapter or

interface cable.

In addition, RS-232, IR, and Ethernet control ports are provided for

controlling the display device and other equipment.

A single fiber strand connects the DM-RMC-100-S to a DM switcher or transmitter,

transporting video, audio, control, and networking signals through one SC type

optical connection.

Multiple DM-RMC-100-S receivers may be installed to handle

each display in a multi-room distribution system, all fed from a central DM switcher.

Or, a single DM-RMC-100-S can be fed straight from a DM 8G Fiber transmitter to

extend a computer or AV signal to a single display.

LAN Connectivity

Along with high-definition AV and control, DigitalMedia also integrates high-speed

Ethernet networking for a total signal distribution solution. The DM-RMC-100-S

includes a 10BASE-T/100BASE-TX Ethernet port, providing a convenient LAN

connection for a local network device.

Embedded Device Control

The DM-RMC-100-S includes built-in RS-232, IR, and Ethernet control ports to

allow programmable control of the display device connected to it. It can also provide

an alternative to these conventional control methods by harnessing the CEC

(Consumer Electronics Control) signal embedded in HDMI. Through its connection

to the control system, the DM-RMC-100-S provides a gateway for controlling the

display device right through the HDMI connection, potentially eliminating the need

for any dedicated control wires or IR probes.

1. All cable sold separately. The maximum DigitalMedia 8G Fiber cable length is 1000 feet

(~300 meters) using CRESFIBER8G fiber optic cable, or 500 feet (~150 meters) using standard

CRESFIBER, CRESFIBER-SINGLE-SC, or generic OM3 simplex multimode fiber optic cable.

Refer to the latest version of the Crestron DigitalMedia Design Guide (Doc. 4789) for complete

wiring guidelines. It is available from the Crestron Web site at

www.crestron.com/dmresources.

2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI

interface cable sold separately.

2 • DigitalMedia 8G™ Fiber Receiver 100: DM-RMC-100-S Operations & Installation Guide – DOC. 7067B

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Crestron DigitalMedia Room Controller DM-RMC-100 Guide d'installation Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Crestron DigitalMedia Room Controller DM-RMC-100