Crestron SW-VOTE Manuel d'utilisateur télécharger pdf (Page 57)

DCS 6000 Digital Conference System User Manual

Turn on microphone from request list

mic_on_from_request xCR>

Turns on microphone x from the request list.

If a microphone is turned on, the CU sends a ‘mic_on’ command and a ‘mic_request_off’ command.

Place microphone in request list

mic_request_on <seat no><CR>

Insert microphone into request list.

If the CU inserts the unit into the request list, it replies with a ‘mic_request_on’ command.

Remove microphone from request list

mic_request_off <seat no><CR>

Remove microphone from request list.

If the CU removes the unit from the request list, it replies with a ‘mic_request_off’ command.

Clear request list

mic_all_requests_off<CR>

Clear the request list.

The CU responds by issuing a ‘mic_request_off’ command for each microphone that is removed from

the request list.

Set next microphone on

mic_next_on<CR>

Turns on first microphone from the reply list. If the reply list is empty the first microphone in the request

list is turned on..

If a microphone is turned off, the CU sends a ‘mic_off’ command.

If a microphone is turned on, the CU sends a ‘mic_on’ command and a ‘mic_reply_off’ or

‘mic_request_off’ command.

Set max total speakers

max_total_speakers <max total speakers><CR>

Maximum number of speakers allowed to speak.

<max total speakers> Can be set to “1” to “8”

The CU responds by sending a ‘max_total_speakers’ command.

Set max delegate speakers

max_speakers <max speakers><CR>

Maximum number of delegates allowed to speak.

<max speakers> Can be set to “1” to “8”

The CU responds by sending a 'max_speakers' command.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 70 71

Pas de commentaire

Crestron SW-VOTE Manuel d'utilisateur Page 57