Crestron SP-1 Manuel d'utilisateur télécharger pdf (Page 8)

CRESTRON

4 •• Relay Controller: SP-RY Operations Guide - DOC. 5737

SP-RY with SmarTouch™ ST-CP

Connect the 3.5 mm, Serial Data Cable (supplied) to the input port on the SP-RY.

Connect the other end of the cable to one of the outputs on the ST-CP. The cable

should be connected to the appropriate control device.

To program the ST-CP for the Relay Controller, refer to the SmarTouch STS Wizard

included with VisionTools Pro™ or the latest revision of Crestron's SIMPL™

Windows® programming software (v 1.20.04 or later) and the latest version of the

Crestron Database (v 11.7.207).

NOTE: An external power supply must be used when using the SP-RY with the

SmarTouch ST-CP system.

Connect SP-RY to ST-CP

To Devices

Serial Data CableSerial Data Cable

Serial Data Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Crestron SP-1 Manuel d'utilisateur Page 8