Crestron CNX-BN12 Guide d'installation télécharger pdf (Page 15)

Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads

Hardware Hookup

Make the necessary connections as called out in the illustration that

follows this paragraph. Refer to “Network Wiring” on page 8 before

attaching the 4-position terminal block connector. Apply power after all

connections have been made.

When making connections to the CNX-BF12 & CNX-BN12, use

Crestron power supplies.

Hardware Connections for the CNX-BF12 & CNX-BN12

CRESNET:

CONNECT

TO THE

CRESNET

CONTROL

NETWORK

Button Replacement

Replacing/changing the removable buttons in a keypad is a simple

process. Refer to the illustrations on page 10 and the following

procedures.

1. Remove faceplate from front of keypad.

2. If the keypad is installed in an electrical box, remove the two

1-inch securing screws, carefully pull the keypad from the

electrical box, and disconnect the Cresnet cable.

3. Remove the divider.

Operations & Installation Guide – DOC. 8185A Function & Numeric Keypads: CNX-BF/BN12 • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

Crestron CNX-BN12 Guide d'installation Page 15