Crestron TPS-IMW Spécifications télécharger pdf (Page 33)

Crestron Isys

TPS-4000 10.4 Inch Tilt Touchpanel

To prepare the TPS-4000 for uploading or upgrading, refer to the following figure

for a typical connection diagram.

Typical Connection Diagram when Uploading a Touchpanel Project or Firmware

Alternatively, touchpanel projects and firmware can be directly uploaded to the

touchpanel from a PC without the use of a control system. To prepare the TPS-4000

for uploading or upgrading directly from a PC, refer to the following figure. Connect

the RS-232 port of the computer directly to the RS-232 port of the touchpanel. Refer

to page 15 for RS-232 cable information.

NOTE: Directly connecting to the touchpanel over RS-232 provides a faster

transmission speed than Cresnet.

NOTE: The touchpanel must be connected to 24 VDC and ground.

Typical Connection Diagram when Uploading a Touchpanel Project or Firmware Directly

to the Touchpanel

NOTE: For cable pinouts, refer to “RS-232” on page 15.

1. Open the Crestron Viewport.

Either launch the stand-alone version of Viewport, or start SIMPL

Windows, and from the menu bar, select Tools | Viewport.

2. Refer to the following figure. From the Viewport menu, select Setup |

Communications settings (alternatively, press Alt+D) to open the “Port

Settings” window.

Operations Guide - DOC. 6268 10.4 Inch Tilt Touchpanel: Crestron Isys

TPS-4000 • 29

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Pas de commentaire

Crestron TPS-IMW Spécifications Page 33