Crestron TPS-IMC-BV Guide d'installation télécharger pdf (Page 13)

Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel

TPS-VID-1/VID-2 Installation (4 of 6) – Install TPS-VID-1/VID-2

Mounting Screws

10. Position the touchpanel base cover onto the base by tilting the

front of the cover downward under the touchpanel pivot and

lowering the base cover.

11. Hold the touchpanel base cover in place and position the

touchpanel face-down onto a padded surface to prevent

scratching of the screen.

12. Re-install the eight base cover screws to finger-tight then,

using a Phillips screwdriver, tighten each screw an additional

1/8-turn. Refer to the following diagram for screw locations.

Operations & Installation Guide - DOC. 6059 Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Pas de commentaire

Crestron TPS-IMC-BV Guide d'installation Page 13