Crestron TPS-ENET Guide d'installation télécharger pdf (Page 9)

Crestron TPS-ENETL Ethernet Card for TPS/Lectern Panel

TPS-ENETL Front View

LINK STATUS

LED (GREEN)

ETHERNET

ACTIVITY

LED (YELLOW)

Industry Compliance

As of the date of manufacture, the TPS-ENETL has been tested and

found to comply with specifications for CE marking and standards per

EMC and Radiocommunications Compliance Labelling (N14176).

NOTE: This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Setup

Installation and Hookup

The TPS-ENETL is designed to be installed in a specific expansion slot

in the TPS-5000L and TPS-6000L touchpanels and the TPS-TPI

touchpanel interface. The tools required for installation are a grounding

strap (or grounded workstation) and a #1 Phillips screwdriver.

CAUTION: The TPS-ENETL and the touchpanel contain electrostatic

sensitive devices (ESDs); observe precautions for handling ESDs to

avoid damaging the card and/or the touchpanel.

Operations & Installation Guide - DOC. 6013 Ethernet Card for TPS/Lectern Panel: TPS-ENETL • 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Pas de commentaire

Crestron TPS-ENET Guide d'installation Page 9