Crestron TPS-ENET Spécifications télécharger pdf (Page 40)

12 Inch Tilt Touchpanel Crestron Isys™ TPS-5000

Setup | Communications Settings Command

3. Select RS-232 as the connection type. Verify that an available COM port

(COM 1 is shown after this step) is selected, and that all communication

parameters and necessary options from the “Port Settings” window are

selected as shown after this step. Click the OK button to save the settings

and close the window.

“Port Settings” Window

NOTE: The parameters shown in the previous illustration are the port settings for a

2-Series control system. Consult the Operations Guide for the control system being

used for exact parameter selection.

NOTE: If connecting to the touchpanel through a control system, the baud rate may

need to be set to 38400 baud (Cresnet speed) for a successful transfer.

36 • 12 Inch Tilt Touchpanel: Crestron Isys™ TPS-5000 Operations Guide - DOC. 5863A

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

Pas de commentaire

Crestron TPS-ENET Spécifications Page 40