Crestron TPMC-CH-IMW Spécifications télécharger pdf (Page 17)

Crestron TPMC-CH-IMW CAT5 Balanced AV Interface Wall Plate

If a video signal is not going to be connected, leave the connector with

the jumpers attached to the VIDEO connector.

Mount in

Electrical

Box

The TPMC-CH-IMW mounts into a 2-gang electrical box

(recommended 2.5" depth). Verify that the unit is mounted into the

electrical box as shown in the following diagram. Secure the

TPMC-CH-IMW to the electrical box with the four #6-32 flat-head

slotted screws (supplied).

TPMC-CH-IMW Mounting

Install

Decora

Wallplate

Once the TPMC-CH-IMW is mounted into a 2-gang electrical box, it

can be covered with a Decora wallplate (purchased separately).

Install

Decora

Inserts

Remove the backing from the tape on the back of the supplied insert

plates. Affix each insert plate into its proper opening in the wallplate.

For the proper orientation of the two insert plates with respect to the

installed TPMC-CH-IMW, refer to the following diagram.

Operations Guide – DOC. 6448 CAT5 Balanced AV Interface Wall Plate: TPMC-CH-IMW • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Crestron TPMC-CH-IMW Spécifications Page 17