Crestron C2N-RTHS Guide d'installation télécharger pdf (Page 5)

Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet

Temperature and Humidity

Sensor, Cresnet: C2N-RTHS

Introduction

The C2N-RTHS is a wall-mounted temperature and relative humidity

sensor that communicates directly with any 2-Series control system via

the Cresnet

control network. One-piece mounting makes the C2N-RTHS

simple to install. The 1-1/2 inch (39 mm) diameter face protrudes just 1/8

inch (3 mm) from the wall surface and is easily painted or wallpapered to

blend into the wall surface.

Features and Functions

• Small and unobtrusive face allows blending into any decor

• Primed white, may be used as is, painted, or wallpapered

• Easy one-piece mounting (additional hardware not required)

• Readily connects to Cresnet with four wire pigtail (four wire

nuts included)

• Touch Settable ID (TSID) capable

NOTE: The C2N-RTHS is not to be used in conjunction with the

CHV-TSTAT or the CHV-THSTAT. The C2N-RTHS is a Cresnet

network device.

Operations and Installation Guide - DOC. 6232B Sensor, Cresnet

• 1

1 2 3 4 5 6 7 8 9 10 ... 23 24

Pas de commentaire

Crestron C2N-RTHS Guide d'installation Page 5