Crestron STRFGWX Spécifications télécharger pdf (Page 18)

2-Way RF Wireless Touchpanel Crestron STX-1700C

Accessing the “Port Settings” Window

8. Select the RS-232 connection type. Verify the available COM is selected.

Verify that the baud rate is set to 115200 (PRO 2 default), the parity is

None, the data bits is Eight, and the stop bits is One. Click the OK button

to save the settings and close the window.

NOTE: You may need to select a lower baud rate for larger files (38,400 is

recommended). Make sure XModem is selected from “Mode for Network

Transfers.”

“Port Settings” Window

9. Proceed to “Uploading a VT Pro-e Project” on the next page or “Firmware

Upgrade” that begins on page 16 as appropriate.

14 • 2-Way RF Wireless Touchpanel: STX-1700C Operations Guide - DOC. 6049

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

Crestron STRFGWX Spécifications Page 18