Crestron SMK-12 Manuel d'utilisateur télécharger pdf (Page 6)

Swivel Mount Kit Crestron SMK-12/15/17

Installation

This section provides an installation procedure for each kit. The only tools required

are a suitable drill and a #3 Phillips screwdriver.

To attach the SMK-12/15/17 Swivel Mount Kit to the touchpanel and install the

assembly on a suitable mounting surface, refer to the following illustrations and

perform the associated procedures.

1. First, determine if your touchpanel has the required base plate for the

Swivel Mount Assembly by comparing the base plate on the bottom of your

touchpanel with the following drawing.

SMK-12/15/17 Required Base Plate

THESE RECTANGULAR

CUTOUTS INDICATE THE

CORRECT

BASE PLATE FOR THE

SMK-12/15/17 SWIVEL MOUNT

KIT

BOTTOM VIEW OF TOUCHPANELS

TPMCs

TPS-Gs

TPS-12/15/17

TPS-12B/W

TPS-15B/W

TPS-17B/W

2. Prepare the mounting surface using the template (shown on next page)

provided with the kit.

3. Taking note of the front position as indicated by the dashed line on the

template, drill holes in the places indicated.

• Swivel Mount Kit: SMK-12/15/17 Installation Guide – DOC. 6467

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Crestron SMK-12 Manuel d'utilisateur Page 6