Crestron TSW-730-MSMK Manuel d'utilisateur télécharger pdf

quickstart guide

TSW-730

www.crestron.com

888.273.7876 201.767.3400

Specifications subject to

change without notice.

TSW-730

7” Room Scheduling Touch Screen

The Crestron

TSW-730 Touch Screen ships with 10 “hard key” push buttons for

quick access to commonly used functions. Optional, custom engravable button

covers are available (TSW-730-BTNO-[B, W]-S and custom engraving sold

separately). For a clean appearance, either column of buttons may be removed

and covered using the no-button covers provided.

To change the inserts or covers, use the following procedure:

1. Insert a small, slot head screwdriver into the appropriate hole on the bottom of

the touch screen to release its cover. Refer to the following illustration.

Change the Button Inserts or Button Covers

QUICKSTART DOC. 7412C (2034621, Sheet 1 of 2) 04.14

Mounting in a U.S. Electrical Box

Install the Touch Screen

2. With the bottom of the cover released, gently remove it from the touch screen.

3. If removing the button insert, after releasing and removing the button cover,

use a small slot head screwdriver to press and gently lift the button insert from

the touch screen. Refer to the following illustration for the press and lift points

on the button insert.

4. Gently place the new cover in position and press it into place.

2. Use the four included #06-32 x 1 x 1/2” screws (2031703) to attach the back

panel to the electrical box, as shown in the following illustration.

3. Carefully position the front of the touch screen over the back panel and gently

snap it into place.

4. Use two of the included #04-40 x 1/4” screws to secure the touch screen, as

shown in the following illustration:

a. For standard applications, use the Phillips screws (2007152 or 2007160).

b. For secure applications, use the security type Torx screws (2025311 or

2025312) along with the included Torx screwdriver bit (2025915).

The TSW730 touch screen installs simply and easily into a standard electrical box or

onto virtually any flat surface.

A tabletop enclosure, the TSW-730-TTK and swivel mount, SMK-4SM/730 are also

available (both sold separately). For mounting onto a flat surface, use the

TSW-730-MSMK Multi-Surface Mounting Kit (sold separately).

The TSW-730 is supplied with screws for installation into an electrical box.

To mount the TSW-730 into a U.S. electrical box, use the following procedure:

1. Insert a small slot head screwdriver into the hole shown in the following

illustration and gently separate the back of the touch screen.

Insertion Point for Separation of Back Panel

Insertion Points for Button Cover Releases

Touch Screen with Button Inserts

Touch Screen with No-Button Covers

For regulatory compliance information, refer to Doc. 7413.

Insert screwdriver to release covers

Use screwdriver

to release button insert

Insert screwdriver to separate back of touch screen

Mounting the Touch Screen into an Electrical Box

Screws (2) #04-40 x 1/4”

For standard applications: Phillips

(2007152 or 2007160)

For secure applications: security type Torx

(2025311 or 2025312)

Secure the Touch Screen

U.S. Electrical Box

TSW-730

Screws (4) #06-32 x 1 1/2”

(2031703)

1 2 3 4

Résumé du contenu

Page 1 - Install the Touch Screen

quickstart guide TSW-730www.crestron.com 888.273.7876 201.767.3400 Specifications subject to change without notice. TSW-730 7” Room Scheduling Touc

Page 2 - CRESTRON

quickstart guide TSW-730www.crestron.com888.273.7876 201.767.3400Specifications subject to change without notice.TSW-7307” Room Scheduling Touch Scree

Page 3 - Dimensions

quickstart guide TSW-730www.crestron.com888.273.7876 201.767.3400Specifications subject to change without notice.TSW-7307” Room Scheduling Touch Scree

Page 4 - Specifications

quickstart guide TSW-730www.crestron.com888.273.7876 201.767.3400Specifications subject to change without notice.TSW-7307” Room Scheduling Touch Scree