Crestron IM-FTCC-B Guide d'installation télécharger pdf (Page 21)

Crestron IM-FTCC-B iMedia FlipTop Computer Center

Mounting Brackets Installed - IM-FTCC-B

FOUR #10-32 2"L

SCREWS

6.77 in

(17.20 cm)

EIGHT

#6-32 3/16"L

SCREWS

TWO MOUNTING BRACKETS

Mounting Brackets Installed - IMI-FTCC-B

7.34 in

(18.64 cm)

FOUR #10-32 2"L SCREWS

TWO MOUNTING BRACKETS

EIGHT #6-32 3/16" L SCREWS

Hardware Hookup

Refer to the following hookup diagram and, aside from attaching power last,

complete the connections in any order.

NOTE: To prevent overheating, do not operate this product in an area that

exceeds the environmental temperature range listed in the specifications table.

Consideration must be given if installed in a closed or multi-unit rack assembly,

inside a closed desk, or in a closed podium since the operating ambient

temperature of these environments may be greater than the room ambient.

Contact with thermal insulating materials should be avoided on all sides of the

unit.

NOTE: The maximum continuous current from equipment under any external

load conditions shall not exceed a current limit that is suitable for the minimum

wire gauge used in interconnecting cables. The ratings on the connecting unit's

supply input should be considered to prevent overloading the wiring.

Operations & Installation Guide – DOC. 6349A iMedia FlipTop Computer Center: IM-FTCC-B • 17

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Crestron IM-FTCC-B Guide d'installation Page 21