Crestron Green Light IPAC-GL1 Guide d'installation télécharger pdf (Page 12)

Integrated Professional Automation Computer Crestron IPAC-GL1

Setup Menu

For Unconfigured Systems

(First time use only)

If the system has not been configured, the IPAC will display the Setup Menu.

For Configured Systems

If a system has already been configured, the Setup Menu can be opened from the

IPAC home page. To open the Setup Menu:

• Press the HOME button.

• Press the soft button labeled Setup.

Setup Menu

Select

Project Settings

Panels

Keypads

Timeclock

Setup

Select

The Setup Menu is broken down into eight sections:

• Project Settings – Sets the geographical location of the IPAC installation

as well as the time, date, and Daylight Savings Time mode.

• Panels – Configures lighting loads controlled by the IPAC.

• Keypads – Configures the front panel function buttons and all external

keypads installed in the IPAC system.

• Timeclock – Configures the IPAC’s timeclock.

• Sensors – Configures operation of sensors connected to the IPAC.

• Password – Sets the front panel password.

• Ethernet Settings – Configures the IPAC’s Ethernet settings.

• About – Displays information about the IPAC.

To select an item to configure, turn the selection knob to highlight the desired section

and press the ENTER button or the soft button labeled Select.

8 • Integrated Professional Automation Computer: IPAC-GL1 Setup Guide – DOC. 6660B

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 69 70

Pas de commentaire

Crestron Green Light IPAC-GL1 Guide d'installation Page 12