Crestron ST-DSN Spécifications télécharger pdf (Page 30)

1-Way Wireless RF Touchpanel Crestron ST-1700C

Accessing the “Port Settings” Window

7. Select the RS-232 connection type. Verify the available COM is

selected. Verify that the baud rate is set to 115200 (PRO2 default), the

parity is None, the data bits is Eight, the stop bits is One, XON/XOFF

is not selected, and RTS/CTS is selected. Click the OK button to save

the settings and close the window.

NOTE: If problems occur when transferring any Cresnet file (touchpanel

project/firmware), lower the port speed baud rate to 38400 to match the Cresnet bus

speed when transferring through a control system. Make sure Xmodem is selected

from Mode for Network Transfers.

“Port Settings” Window

8. Proceed to “Uploading a VT Pro-e Project” on the next page or

“Firmware Upgrade” that begins on page 28, as appropriate.

26 • 1-Way Wireless RF Touchpanel: ST-1700C Operations Guide – DOC. 6225A

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

Crestron ST-DSN Spécifications Page 30