Crestron PSPHD Spécifications télécharger pdf (Page 14)

Professional Surround Sound Tuning Kit Crestron

PROCISE Tools “System Configuration” Window

If you have not already installed the special file for the microphone that came with

your Professional Surround Sound Tuning Kit, insert the CD that came with your kit

and click Add/Change Mic Setup File. The application will present a standard

“Browse” window where you can navigate to your CD drive and select the special

file for the microphone that came with your Professional Surround Sound Tuning

Kit. This should be “Audyssey Mic #####.apm” (where ##### represents the

microphone serial number).

Room EQ setup

When the Pro Sound Tools or PROCISE Tools application is launched, it will

provide a window for selecting the current system configuration (for example, 5.1,

6.1, 7.1 plus additional rooms, etc.). When a center speaker or subwoofer is not used,

un-check the Front Center Speaker and/or Subwoofer checkboxes as appropriate, in

order to enable “phantom” center and “phantom” subwoofer. The phantom setting

will route center and/or subwoofer information to the main speakers.

Any subwoofer low-pass filter should be defeated or set to the THX setting

(sometimes called “LFE input”). If the subwoofer low-pass filter cannot be defeated,

set it to its maximum frequency. Any subwoofer gain settings should be set to their

nominal position or at 12 o’clock on a conventional level control. Also, if the

subwoofer has any sort of auto standby or sleep mode that turns the power to the

subwoofer off after it does not receive any signal for some period of time, please

disable this mode. This will ensure that the subwoofer is always on, which is

important when taking measurements. The subwoofer may be set back to auto after

measuring is complete.

Click Room Equalization Setup… to begin the process.

NOTE: If you have not already done so, the application will prompt you to install

the special file for the microphone that came with your Professional Surround Sound

Tuning Kit.

NOTE: The Master Volume control and Active Input Source drop down list will

function until the process gets to the “Job Information” screen, at which point the use

of these is disabled until the filters are transferred (refer to “Save Results” which

starts on page 13).

6 • Professional Surround Sound Tuning Kit Operations Guide – DOC. 6565C

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Pas de commentaire

Crestron PSPHD Spécifications Page 14