Crestron CNAMPX-2X60 Spécifications télécharger pdf (Page 13)

Crestron

CNAMPX-2X60

2 Channel Professional Audio Amplifier

Hookup Connections for the CNAMPX-2X60 in Bridged Mode

INPUTS

SUMMING

BRIDGED

RIGHT

BRIDGED

ATTENTION:

POUR LA PROTECTION CONTRE LES RISQUES

BRIDGED

–

D'INCENDIES N'UTILISEZ SEULEMENT LE MÊMES TYPE DE

FUSIBLE. DÉBRANCHEZ LE CÂBLE D'ALIMENTATION

AVANT DE CHANGER LE FUSIBLE.

RISQUE DE CHOC ELECTRIQUE NEPAS OUVRIR

AVIS:

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

PWR

NET

CAUTION:

FOR CONTINUED PROTECTION AGAINST FIRE

HAZARD USE ONLY SAME TYPE AND RATING FUSE.

DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.

OVERRIDE/

SETUP

8A 125V

120V~60Hz

960 WATTS MAX

MADE IN THE USA

DATE:

4 - 8 OHM

OUTPUTS

CRESTRON

RIGHT

FROM AC OUTLET

OR POWER STRIP

AUDIO

SOURCE

AUDIO

SOURCE

GND(S)

CONTROL

SYSTEM

MODE

SWITCH

SET TO

BRIDGED

SPEAKER

Identity Code

Every equipment and user interface within the Cresnet system requires a unique NET

ID. These codes are recognized by a two-digit hexadecimal number from 03 to FE.

The NET ID of the unit must match an ID code specified in the SIMPL Windows

program. The NET ID of the CNAMPX-

2X60

is factory set to 3F. The NET IDs of

multiple CNAMPX-

2X60

must all be unique and changed from a personal computer

(PC) via SIMPL Windows or VisionTools™ Pro-e (VT Pro-e).

NOTE: VT Pro-e is a Windows compatible software package for creating Crestron

touchpanel screen designs.

The method for changing the unit’s NET ID is identical regardless of the software

chosen. Complete the following steps to change the NET ID.

1. Attach only one of the CNAMPX-

2X60

s to the control system (verify

that the software is running).

2. From the SIMPL Windows or VT Pro-e menu, select Tools | Viewport

to open the Crestron Viewport.

3. From the Viewport menu, select Functions | Set Network ID. The

software checks the baud rate and then opens the “Set Network ID”

dialog box.

4. In the “Set Network ID” dialog box, select the CNAMPX-

2X60

from

the Current Network Devices text window.

5. From the Choose the new network ID for the selected device (Hex): text

box, select the new Net ID for the CNAMPX-

2X60

6. Click Set ID to initiate the change. This will display the “ID command

has been sent” dialog box.

7. In the “Command Complete” dialog box, click OK.

8. In the Current Network Devices text window, verify the new NET ID

code.

9. In the “Set Network ID” dialog box, click Close.

Operations Guide – DOC. 8178 2 Channel Professional Audio Amplifier: CNAMPX-2X60 • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Crestron CNAMPX-2X60 Spécifications Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Amplificateurs audio Crestron CNAMPX-2X60